Tried to make the connection between the upper part of my chamber and the ISO 100 bellows, this is the result:
Since I don't have a lathe, I used the pillar drill and the right angle grinder to make the circular grooves:
This is the viton ring on the pump side:
The disk with the bellows:
The grove on the chamber side, a viton ring is going to be placed directly in the groove, the M10 en M8 holes have thread for connecting to the chamber and connecting the bellows:
Now with the 80mm opening, it still needs a lot of polishing:
0 reacties:
Een reactie posten